Ejector Pin Un-Nitrided FDAC Soft 20.0 x 250mm (Head 25Ø x 8mm)
Matl. = SKD61 = H13/Hardness = HV900 Surface, & HRC 42-47 Inside.
|t : 8mm|
|d : 20.0mm|
|l : 250mm|
|h : 25mm|
Other sizes of pins and sleeves also available on indent. *Un-nitrided pins are from FDAC (=H11) material with a through hardness of 35-40 HRC, and so can be machined to desired shape, then nitrided without further heat treatment.