Lathe Centres - Interchangeable, Live, Solid & Pipe

6806390
#12 RETAINING RING FOR 4MT  LIVE CENTRE
$1.16 excl GST

#12 RETAINING RING FOR 4MT LIVE CENTRE

Narex

#12 Retaining Ring For 4MT Live Centre

$1.16 excl GST
6806200
#2 CENTRE FOR 3MT LIVE CENTRE
$72.47 excl GST

#2 CENTRE FOR 3MT LIVE CENTRE

Narex

Narex #2 Centre For 3Mt Live Centre

$72.47 excl GST
6806330
#4 SLEEVE FOR 4MT LIVE CENTRE
$62.60 excl GST

#4 SLEEVE FOR 4MT LIVE CENTRE

Narex

#4 Sleeve For 4MT Live Centre

$62.60 excl GST
6806430
#7 NEEDLE BEARING CAGE FOR 5MT  LIVE CENTRE
$54.35 excl GST

#7 NEEDLE BEARING CAGE FOR 5MT LIVE CENTRE

Narex

#7 Needle Bearing CAGE For 5MT Live Centre

$54.35 excl GST
6805140
1MT LIVE LATHE CENTRE
$124.24 excl GST

1MT LIVE LATHE CENTRE

Narex

These centres are intended for the clamping of workpieces on lathes Run - out tolerance of max. 0.0035 mm Morse taper 1 Overall length (L) 114mm Po...

View full details
$124.24 excl GST
6805150
2MT LIVE LATHE CENTRE
$184.21 excl GST

2MT LIVE LATHE CENTRE

Narex

These centres are intended for the clamping of workpieces on lathes Run - out tolerance of max. 0.0035 mm Morse taper 2 Overall length (L) 125mm Po...

View full details
$184.21 excl GST
6805300
3MT INTERCHANGEABLE LIVE CENTRE SET
$743.28 excl GST

3MT INTERCHANGEABLE LIVE CENTRE SET

Narex

Centres with interchangeable points are intended for work on lathes. Interchangeable points reduce the need for several centers. Morse taper 3 Over...

View full details
$743.28 excl GST
6805160
3MT LIVE LATHE CENTRE
$228.48 excl GST

3MT LIVE LATHE CENTRE

Narex

These centres are intended for the clamping of workpieces on lathes Run - out tolerance of max. 0.0035 mm Morse taper 3 Overall length (L) 162mm Po...

View full details
$228.48 excl GST
6805100
3MT LIVE LATHE CENTRE EXTENDED POINT
$239.89 excl GST

3MT LIVE LATHE CENTRE EXTENDED POINT

Narex

Extended point , with 60 degree Point Angle The centres are intended for work on lathes. Their extended Point section allows for easier access of t...

View full details
$239.89 excl GST
6805260
3MT x 4" REVOLVING PIPE CENTRE (BULL NOSE)
$194.15 excl GST

3MT x 4" REVOLVING PIPE CENTRE (BULL NOSE)

VERTEX

3Mt x 4" Revolving Pipe Centre (Bull Nose)

$194.15 excl GST
6805310
4MT INTERCHANGEABLE LIVE CENTRE SET
$980.22 excl GST

4MT INTERCHANGEABLE LIVE CENTRE SET

Narex

Centres with interchangeable points are intended for work on lathes. Interchangeable points reduce the need for several centers. Morse taper 4 Over...

View full details
$980.22 excl GST
6805170
4MT LIVE LATHE CENTRE
$287.03 excl GST

4MT LIVE LATHE CENTRE

Narex

These centres are intended for the clamping of workpieces on lathes Run - out tolerance of max. 0.0035 mm Morse taper 4 Overall length (L) 194mm Po...

View full details
$287.03 excl GST
6805110
4MT LIVE LATHE CENTRE EXTENDED POINT
$336.00 excl GST

4MT LIVE LATHE CENTRE EXTENDED POINT

Narex

Extended point , with 60 degree Point Angle The centres are intended for work on lathes. Their extended Point section allows for easier access of t...

View full details
$336.00 excl GST
6805270
4MT x 5" REVOLVING PIPE CENTRE (BULL NOSE)
$218.42 excl GST

4MT x 5" REVOLVING PIPE CENTRE (BULL NOSE)

VERTEX

A pipe centre, also known as a bull nose centre. It allows the centre to be used in the bore of a pipe or other workpiece with a large interior dia...

View full details
$218.42 excl GST
6805180
5MT LIVE LATHE CENTRE
$399.84 excl GST

5MT LIVE LATHE CENTRE

Narex

These centres are intended for the clamping of workpieces on lathes Run - out tolerance of max. 0.0035 mm Morse taper 5 Overall length (L) 240mm Po...

View full details
$399.84 excl GST
6804250
5MT SEMI-HSS LATHE DEAD CENTRE
$160.59 excl GST

5MT SEMI-HSS LATHE DEAD CENTRE

Visus

5MT SEMI-HSS Lathe Centre

$160.59 excl GST
VRT4250
BULL NOSE CENTRE MT3 106mm DIA
$181.00 excl GST

BULL NOSE CENTRE MT3 106mm DIA

VERTEX

From alloy tool sheet to HRC60. Accuracy to .005mm, except interchangeable & bull nose series .008mm. All water resistant. Taper : MT3 ...

View full details
$181.00 excl GST
VRT4252
BULL NOSE CENTRE MT4  106mm DIA
$202.42 excl GST

BULL NOSE CENTRE MT4 106mm DIA

VERTEX

From alloy tool sheet to HRC60. Accuracy to .005mm, except interchangeable & bull nose series .008mm. All water resistant. Taper : MT4 ...

View full details
$202.42 excl GST